Flange Mount, Self Align, PTFE Composite Bronze Bearing

BFM-10M-P

Contact Sales about Ordering or Prototyping

Need Standard Products in quantities less than 1000? Visit our online retailers

Need this part customized? Contact Sales

 
Part #: BFM-10M-P
Mounted Part #: FSP-10M
Bearing Type: Plain
Self Aligning: Self-Aligning
Mounting: Flange-Mount
Nominal ID: 10 mm
Min Shaft Dia: 9.972 mm
Max Shaft Dia: 9.987 mm
Max Radial Load: 2550 N
Max Speed: 3820 rpm
Weight: 34 g
Allowable Motions: Linear
Oscillating
Rotating
Available Options: Clear Zinc Plated (CZP)

Standard finish: black oxide

Body clearance diameter (A) : 22.000 mm
Overall length (B) : 60 mm
Overall width (C) : 36.5 mm
Bolt hole center to center (D) : 45.2 mm
Flange thickness (E) : 1.5 mm
Overall height (F) : 16.3 mm
Mounting hole diameter (G) : 5.5 mm

Spyraflo PTFE composite bronze bearings are an extremely high performance plain bearing. A porous layer of bronze particles is sintered onto a steel backing. A PTFE (polytetreflouroethylene) solid substrate is formed into the porous bronze matrix. During operation, a film of PTFE is transferred to the shaft creating a lubricating film. Continued shaft movement ensures constant presence of PTFE lubricant between the bearing and shaft. Under high loads, the PTFE film performs like a hydrostatic bearing and gives the rare benefit of decreased friction as surface load pressure increases.

This product is a great choice for applications with slow to moderate speeds and loads. Our online WearLife calculator can help you to evaluate the service life. Many designers find this bearing offers an unbeatable combination of cost, performance and long service life for slow speed high load applications. Our PTFE composites are chemically resistant to water, alcohol, glycols and mineral oils and is suitable for applications which are dirty/dusty and are resilient to shock loads.

PTFE Composite Bronze
Material Content / Structure Bronze PTFE Composite Matrix on Zinc Plated Steel Backing
Shaft Requirements Recommended surface finish: 16 RMS (.4 Ra)
Operating Temperature -40° to 280° Fahrenheit
-40° to 195° Celsius
HT-High Temp -0° to 540° Fahrenheit
-17° to 282° Celsius
LT-Low Temp -200° to 200° Fahrenheit
-130° to 93° Celsius
PV Ratings
P - Pressure (Standard) 8000 PSI
P - Pressure (Metric) 56 N/mm^2
V- Velocity (Standard) 400 FPM
V- Velocity (Metric) 2 m/s
PV - Pressure x Velocity (Standard) 50000 PSI x FPM
PV - Pressure x Velocity (Metric) 1.8 N/mm^2 x m/s
Friction Coefficient µ 0.03 to 0.25
Options Bronze or stainless steel backing
Flanged thrust face
Seals
Storage Clean, dry storage.
Maintenance Maintenance free
Copyright © 2018, Spyraflo. All Rights Reserved. Website Developed by Peachtree Solutions.
SALES: 800-487-7601 or 770-631-9990
CUSTOMER SERVICE: 800-487-7601 or 770-631-9990