Flange Mount, Self Aligning, Ball Bearing

FM-10M

Contact Sales about Ordering or Prototyping

Need Standard Products in quantities less than 1000? Visit our online retailers

Need this part customized? Contact Sales

 
Part #: FM-10M
Mounted Part #: SBS2-10M
Bearing Type: Rolling Element
Self Aligning: Self-Aligning
Mounting: Flange-Mount
Nominal ID: 10 mm
ID Minimum: 9.993 mm
ID Maximum: 10.000 mm
Max Radial Load: 1716 N
Max Speed: 37000 rpm
Weight: 19.05 g
Allowable Motions: Oscillating
Rotating
Available Options: Clear Zinc Plated (CZP)

Standard finish: black oxide

Body clearance diameter (A) : 24.700 mm
Overall length (B) : 53.2 mm
Overall width (C) : 32 mm
Bolt hole center to center (D) : 38.9 mm
Flange thickness (E) : 2.3 mm
Overall height (F) : 10 mm
Mounting hole diameter (G) : 5.6 mm

Spyraflo Ball Bearings are ideal for applications requiring a compact design with extremely low rolling resistance and the broadest speed range capabilities. Spyraflo ball bearings are available in a wide assortment of self-aligning configurations or as non-aligning pillow blocks.

Ball Bearing
Material Content / Structure Hardened SAE 52100 high chromium, high carbon, alloy steel
Shaft Assembly Requirements Inner race MUST be supported for interference or press fit
Operating Temperature -30° to 250° Fahrenheit
-34° to 121° Celsius
Options Stainless construction
High / low temperature variant
Lubricant
Friction Coefficient µ 0.004 to 0.008
Storage Clean, dry storage. Desiccants or rust inhibiting paper is recommended for long term storage.
Maintenance Maintenance free
Copyright © 2018, Spyraflo. All Rights Reserved. Website Developed by Peachtree Solutions.
  Spyraflo Inc.
    404 Dividend Drive
Sales and Customer Service: 800-487-7601 or 770-631-9990   Peachtree City, GA, 30269