Press Fit, Self Align, Ball Bearing

PBS1-5M

Contact Sales about Ordering or Prototyping

Need Standard Products in quantities less than 1000? Visit our online retailers

Need this part customized? Contact Sales

 
Part #: PBS1-5M
Bearing Type: Rolling Element
Self Aligning: Self-Aligning
Mounting: Press-Fit
Nominal ID: 5 mm
ID Minimum: 4.993 mm
ID Maximum: 5.000 mm
Max Radial Load: 544 N
Max Speed: 40000 rpm
Weight: 7.25 g
Allowable Motions: Oscillating
Rotating
Available Options: Clear Zinc Plated (CZP)
Stainless Steel (SS)

Standard finish: black oxide

Panel Hole (A) : 16.256 mm (+.07mm / -.00mm)
Flange Dia (or Spline Dia) (B) : 17.5 mm
Flange Thickness (C) : .75 mm
Height (D) : 7.2 mm
Anvil Dia (G) : 16.5 mm
Anvil Min Depth (H) : 8 mm

Spyraflo Ball Bearings are ideal for applications requiring a compact design with extremely low rolling resistance and the broadest speed range capabilities. Spyraflo ball bearings are available in a wide assortment of self-aligning configurations or as non-aligning pillow blocks.

Ball Bearing
Material Content / Structure Hardened SAE 52100 high chromium, high carbon, alloy steel
Shaft Assembly Requirements Inner race MUST be supported for interference or press fit
Operating Temperature -30° to 250° Fahrenheit
-34° to 121° Celsius
Options Stainless construction
High / low temperature variant
Lubricant
Friction Coefficient µ 0.004 to 0.008
Storage Clean, dry storage. Desiccants or rust inhibiting paper is recommended for long term storage.
Maintenance Maintenance free
Copyright © 2018, Spyraflo. All Rights Reserved. Website Developed by Peachtree Solutions.
  Spyraflo Inc.
    404 Dividend Drive
Sales and Customer Service: 800-487-7601 or 770-631-9990   Peachtree City, GA, 30269