Self Clinch, Self Align, Ball Bearing

SBS1-8M

Contact Sales about Ordering or Prototyping

Need Standard Products in quantities less than 1000? Visit our online retailers

Need this part customized? Contact Sales

 
Part #: SBS1-8M
Bearing Type: Rolling Element
Self Aligning: Self-Aligning
Mounting: Self-Clinching
Nominal ID: 8 mm
ID Minimum: 7.993 mm
ID Maximum: 8.000 mm
Max Radial Load: 544 N
Max Speed: 40000 rpm
Weight: 6.12 g
Allowable Motions: Oscillating
Rotating
Available Options: Clear Zinc Plated (CZP)
Stainless Steel (SS)

Standard finish: black oxide

Panel Hole (A) : 16.260 mm (+.07mm / -.00mm)
Min Mount Thickness (B) : 1.5 mm
Min Dist CL to Edge : 11.2 mm
Flange Dia (or Spline Dia) (C) : 17.5 mm
Height (D) : 7.2 mm
Install Force : 49 kN
Anvil Dia (G) : 16.5 mm
Anvil Dia + : mm
Anvil Dia - : mm
Anvil Min Depth (H) : 8 mm

Spyraflo Ball Bearings are ideal for applications requiring a compact design with extremely low rolling resistance and the broadest speed range capabilities. Spyraflo ball bearings are available in a wide assortment of self-aligning configurations or as non-aligning pillow blocks.

Ball Bearing
Material Content / Structure Hardened SAE 52100 high chromium, high carbon, alloy steel
Shaft Assembly Requirements Inner race MUST be supported for interference or press fit
Operating Temperature -30° to 250° Fahrenheit
-34° to 121° Celsius
Options Stainless construction
High / low temperature variant
Lubricant
Friction Coefficient µ 0.004 to 0.008
Storage Clean, dry storage. Desiccants or rust inhibiting paper is recommended for long term storage.
Maintenance Maintenance free
Copyright © 2018, Spyraflo. All Rights Reserved. Website Developed by Peachtree Solutions.
  Spyraflo Inc.
    404 Dividend Drive
Sales and Customer Service: 800-487-7601 or 770-631-9990   Peachtree City, GA, 30269