Self Clinch, Self Align, Ball Bearing


Contact Sales about Ordering or Prototyping

Need Standard Products in quantities less than 1000? Visit our online retailers

Need this part customized? Contact Sales

Part #: SBS1-5M
Bearing Type: Rolling Element
Self Aligning: Self-Aligning
Mounting: Self-Clinching
Nominal ID: 5 mm
ID Minimum: 4.993 mm
ID Maximum: 5.000 mm
Max Radial Load: 544 N
Max Speed: 40000 rpm
Weight: 7.25 g
Allowable Motions: Oscillating
Available Options: Clear Zinc Plated (CZP)
Stainless Steel (SS)

Standard finish: black oxide

Panel Hole (A) : 16.260 mm (+.07mm / -.00mm)
Min Mount Thickness (B) : 1.5 mm
Min Dist CL to Edge : 11.2 mm
Flange Dia (or Spline Dia) (C) : 17.5 mm
Height (D) : 7.2 mm
Install Force : 49 kN
Anvil Dia (G) : 16.5 mm
Anvil Dia + : mm
Anvil Dia - : mm
Anvil Min Depth (H) : 8 mm

Spyraflo Ball Bearings are ideal for applications requiring a compact design with extremely low rolling resistance and the broadest speed range capabilities. Spyraflo ball bearings are available in a wide assortment of self-aligning configurations or as non-aligning pillow blocks.

Ball Bearing
Material Content / Structure Hardened SAE 52100 high chromium, high carbon, alloy steel
Shaft Assembly Requirements Inner race MUST be supported for interference or press fit
Operating Temperature -30° to 250° Fahrenheit
-34° to 121° Celsius
Options Stainless construction
High / low temperature variant
Friction Coefficient µ 0.004 to 0.008
Storage Clean, dry storage. Desiccants or rust inhibiting paper is recommended for long term storage.
Maintenance Maintenance free
Copyright © 2018, Spyraflo. All Rights Reserved. Website Developed by Peachtree Solutions.
  Spyraflo Inc.
    404 Dividend Drive
Sales and Customer Service: 800-487-7601 or 770-631-9990   Peachtree City, GA, 30269